Saturday, December 20, 2008

AC and DC Electric Motors

Dc motors come in two general types. They can have brushes or be brushless. AC motors, as well, come in two different types. They can be two phase or three phase. The differences in DC and AC motors are sometimes subtle, but these differences are what make one types better for a certain use.

Direct current or DC electric motors work for situations where speed needs to be controlled. DC motors have a stable and continuous current. DC motors were the first and earliest motors used. They were found, however, to not be as good at producing power over long lengths. Electric companies found using DC motors to generate electric did not work because the power was lost as the electric was transmitted. Brush DC motors use rings that conduct the current and form the magnetic drive that powers the rotor. Brushless DC motors use a switch to produce the magnetic drive that powers the rotor. Direct current motors are often found in appliances around the home.

Alternating current or AC electric motors are used differently based on what type of AC motor it is. Single phase AC motors are known as general purpose motors. They work well in many different situations. These AC motors work great for systems that are hard to start because they need a lot of power up front. Three phase, also called polyphase, AC motors are usually found in industrial settings. These motors also have high starting power built transmit lower levels of overall power. AC power gets its name from the fact that it alternates in power. The amount of power given off by an AC motor is determined by the amount of power needed to operate the system.

DC and AC electric motors are found everywhere from the home to the car to industrial plants. Motors are important to everyday life. Dc motors were introduced and caused a great revolution in the way many things are done. When AC motors came on the market the way motors were looked at changed because of their amazing starting power potential. DC motors and AC motors are different in many ways, but they still both are usede to power the world.

42 comments:

Anonymous said...

An electric motor uses electrical energy to produce mechanical energy, nearly always by the interaction of magnetic fields and current-carrying conductors. The reverse process, that of using mechanical energy to produce electrical energy, is accomplished by a generator or dynamo. Traction motors used on vehicles often perform both tasks.
Utah electrician

Harris said...

hi i m harris !!
i m working on the project of making elctrical vehicle!!
what i m thinking is ..i select a 1KW gnerator through which i want to connect a DC motor which transmit the elcetrical power to the axle through the belt or chain mechanism!!
the difficulty is i m not able to choose a motor..mean which hp motor is suitable?? how much weight it can sustain? how much mass it support to operate my vehicle in a running condition.??
can u help in this regard abt the calculation?? Reply Must

Anonymous said...

i am student on electrical engineering , you are really proving good information which are really helpful for me , thanks again lol



vancouver Washington electrician

Sarita said...

Interesting discussion.Very useful for students.

natraj

aelwynedee said...

Yeah this blogpost is helpful to he aspiring electricians.
Sydney Electrician

Unknown said...

very informative keep posting the such a valuable information...

http://www.bdelectrical.com

Unknown said...

These all stuffs are very convincing for the people these days and are useful too.

Electrical Power Transformers

Thanks.....

MrBaron said...

Hi all,

Nice information is here what i found, that is really appreciated by me.

Miroir Sortie Garage

Thanks.....

Unknown said...

This blog is very good and efficient with what it does. You give detailed explanations on your posts which make people to understand so much about electrical engineering.
Spring electrician

Unknown said...

I am student on electrical engineering , you are really proving good information which are really helpful for me , thanks again lol

Electrician in Pheonix

rose99 said...

This is a great inspiring article. I visited the site…it is a nice site. Thanks for providing information here…i like your blog post too thanks a lot.
bd electrical

Anonymous said...

Hey there! This is a good read. I will be looking forward to visit your page again and for your other posts as well. Thank you for sharing your thoughts about electrician in your area. I am glad to stop by your site and know more about electrician. Keep it up!
In Australia, electricians can choose to be represented by the Electrical Trade Union (ETU). Electrical Contractors can be represented by Master Electricians Australia or the National Electrical & Communications Association.
You can count on us as your comprehensive solution for Video surveillance systems.

electrician beverly ma

Unknown said...

Pretty good post. I just stumbled upon your blog and wanted to say that I have really enjoyed reading your blog posts.

commercial electrical contractor in ma

pratham vision said...

nice post
look at mine
Pratham Vision is one of the best IT software service provider,who deals into Website designing, web development, SEO, SMO & SMM, Software Development and SEO services company.
Address: Pratham Vision Pvt. Ltd.
C-260, Sector-63, Noida, India
Contact: +91 120 4554055
email:info@prathamvision.com
http://prathamvision.com

Anonymous said...

Informative post, i like it. But if are facing any electrical issues so you can contact online for best solutions of electrician.
Electrician Toowoomba

Unknown said...

Thanks for sharing! This page was very informative and I enjoyed it. Electrician Littleton MA

Anonymous said...

Sir, Really good one, But I want to know about Transformer as we manufacture and offers good quality electrical products.

Kiran Daware said...
This comment has been removed by the author.
Kiran Daware said...

very nice post telling basics about electrical motors...to know more about them, you can go to the link
http://selectrical.blogspot.in/

Girish Metal India said...

Heyy, great content. Please visit Stainless steel round bar manufacturer.

Manibhadra Fittings said...

It's Great...! Also Read Copper Pipes Manufacturer in India

New Era Pipe Fittings said...

It's a really informative post, You may also check out EN 1092-1 Flanges

Shashwat Stainless said...

Heyy great bog. Please check out ERW pipe manufacturer!

khd valves said...

Heyy great blog Thanks for Sharing Please Keep on Posting. Also visit Three Piece Design Ball Valves Manufacturer

Aashish Steel said...

This is a very useful blog. Visit us Bolts Manufacturer in India

Neptune Alloys said...

It's a really informative post, You may also check out Inconel X750 Spring Wire Supplier in India

Concorde Valves said...

Thanks For Sharing the Valuable Information
Also Visit - Pneumatic Ball Valves
KITZ brass ball valves in Mumbai

Shashwat Stainless said...

Thank you for sharing this important information and helping us achieve our aim. You can visit here Shashwat Stainless Inc and here also ERW Pipes Manufacturer in India

Inox said...

Nice info! Also Read onAluminium Sheet Manufacturers in India or visit the website Inox Steel India to know more.

f60host said...

Thank you very much for sharing this fantastic tutorial. In the future, I want to see more blogs. You might also go to: F60 Host - Lowest Domain Prices in India and Lowest G-suite prices

Manan Steels and Metals said...

Thank you for sharing this critical information and assisting us in achieving our goal..Also visit Us;Round Bar Manufacturer
Visit Us:https://manansteel.com/

inco011 said...

Nice Blog! Also Read on Flange Manufacturer In DubaiSlip on Flange, Long Weld Neck Flange, Ring Joint Flange, ASME B16.5 FLANGES or visit the website Inco Special Alloys to know more

Kushal lalwani said...

Your article on your site supplied us with the knowledge that was both interesting and useful. Many, many thanks for giving it out. https://www.siliconsteelalloys.com/stainless-steel-253-ma-seamless-welded-pipe-supplier-stockist.html.

Jayant Chandan said...

It was a very good post indeed. I thoroughly enjoyed reading it during my lunchtime. Will surely come and visit this blog more often. Thanks for sharing. https://www.nexusgroupindia.in/aluminium-tape-bare.html

Paresh Munot said...

In fact, the post was excellent. During my lunch break, I had a great time reading it. I'll definitely return and check on this site more often. Thank you for revealing this. http://www.calicometal.net/alloy-zeron-100-plate-fittings-manufacturer-supplier.html

Kushal Bhansali said...

In reality, the post was fantastic. I enjoyed reading it during my lunch break. I'll surely back and visit this blog more often. Thank you for bringing this to light. https://www.fas10.in/super-duplex-uns-s32750-bolt/

Jigar Kanugo said...

The article really was excellent. During my lunch hour, I quite liked reading it. I plan on returning to this site on a regular basis. A big hat off to you for revealing this to us. https://www.veerexport.com/duplex-2205-pipes-tubes-supplier-stockist.html

Unifit Flanges said...

I really like this Article..I enjoyed reading it Unifit Flange

VM Energy said...

Nice article...Great post for all bloggers. Good job. VM Energy

Ranfit Metal said...

Awesome!! The quality of content in blogging really matters a lot. Ranfit Metal

Navrekha Steel said...

Great Job....Will surely come and visit this blog more often. Navrekha Steel

Rawsteel said...

Excellent...I want to see more blogs...Rawsteel Alloys

Add to Technorati Favorites